| |
|
|
| |
Protect Your Hull |
|
| |
|
|
| |
All Jetcraft boats are constructed using the highest quality marine aluminum alloy. Corrosion is not usually something you worry about when you purchase an aluminum boat. And you shouldn't worry if you follow these basic precautions: |
|
| |
|
|
| |
| |
a. |
If you fish in salt waters, install a transom mounted sacrificial zinc anode. This zinc anode will corrode before the metal it protects. |
| |
b. |
Regularly rinse your boat with fresh water. |
| |
c. |
Never apply a copper, lead, or mercury based anti-fouling paint to your Jetcraft. |
| |
d. |
Always inspect your boat for signs of corrosion. If you see damage, inspect all wiring for breaks or loose connections. |
|
|
| |
|
|
| |
Under normal conditions aluminum keeps its attractiveness with little maintenance needed. Your Jetcraft should be cleaned regularly with a mild marine safe detergent and rinsed with fresh water. Applying quality waxes will improves the appearance of your Jetcraft. Wiping the sides of your boat with a dry towel will help reduce water stains. Consult with your dealer about deoxidizing acid based cleaners to remove heavily stained surfaces. |
|
| |
|
|
| |
Protect Your Vinyl |
|
| |
|
|
| |
| |
a. |
Clean vinyl regularly to maintain a neat appearance and extend its life. Use warm, soapy water then rinse properly. |
| |
b. |
For more stubborn stains use mild detergents such as Fantastic or Mr. Clean. Never use detergents repeatedly for normal cleaning. |
| |
c. |
Certain stains may become permanent unless removed immediately. |
| |
|
| |
|
| • |
Permanent Marker – Wipe immediately with rubbing alcohol in ventilated area. |
| • |
Oil Base Paint – Turpentine will remove fresh paint. Rinse with soap and water. |
| • |
Latex Paint – Wipe with damp cloth. Hot, soapy water removes dried latex paint. |
| • |
Tar, Asphalt – Remove immediately. Use cloth lightly dampened with mineral spirits and rub gently. Rinse with soap and water. |
| • |
Bird Excrement – Sponge area with soapy water containing diluted bleach. Rinse well with clean water. |
| • |
Surface Mildew – Wash with diluted bleach. Use a soft brush for stubborn areas. Rinse completely with clean water. |
|
|
|
WARNING – Powdered abrasive-type cleaners, steel wool, industrial type cleaners are not recommended. Lacquer solvents will cause immediate irreparable damage to your vinyl. Never use wax on vinyl as it causes premature cracking. Never use chlorine at full strength. Use only very small amounts of solvents, alcohol or varsol type products in well ventilated areas away from ignition sources and wear gloves. |
| |
|
| |
Consider keeping a brand name vinyl cleaner on board such as 3M™ Marine Vinyl Cleaner and Restorer, just in case! |
|
|
|
| |
|
|
| |
Protect Your Top |
|
| |
|
|
| |
All Jetcraft boats are constructed of high quality vinyl. To insure its long life the following precautions should be taken. |
|
| |
|
|
| |
| |
• |
When storing top and side curtains, always roll up. Folding creates creases. |
| |
• |
Store away from direct sunlight to avoid UV damage. |
| |
• |
Do not let side curtains come in contact with very hot surfaces. |
| |
• |
Handle carefully in temperatures below freezing to avoid cracking. |
| |
• |
Always put top down when towing at highway speeds. |
| |
• |
To keep the shape of your top and side curtains, reinstall when boat is not in use to reduce shrinkage. |
| |
• |
Clean your top with a mild detergent and soft bristle brush. Use a brand name vinyl protector. |
|
|
| |
|
|
| |
Protect Your Livewell |
|
| |
|
|
| |
| |
• |
Always switch the pump to the off position while underway or pump damage will occur. |
| |
• |
Be sure to empty the livewell during freezing weather. Frozen water in hoses will expand and burst the hose. |
|
|
| |
|
|
